|
Post by highpockets on Oct 27, 2011 21:24:40 GMT -7
Well after several weeks of trying to make a ZR1 clutch assy work in a C5,we ended up back with a C5 clutch kit in the car and are once again moving forward with this car. Test fit the engine assy again to route more oil lines,here are some pics. Oil return line from reservoir to front of pan,VERY tight fit,this was as big a pain as the suction lines from the sump ! Remote mount oil filter,tucked in the drivers inner fender.I added some additional heat shield(orange wrap on hose) to protect the line closest to the header.
|
|
|
Post by highpockets on Oct 27, 2011 21:27:50 GMT -7
We also installed individual oil coolers for the trans and rear diff,dr side is diff(due to outlet locations on diff) pass side is trans. Lines are clamped to bumper/rails as needed .I believe I could build AN hoses in my sleep now !
|
|
|
Post by unreal on Oct 28, 2011 6:44:19 GMT -7
Looking good. Can't wait to see this run.
|
|
z06801
Junior Member
Posts: 144
|
Post by z06801 on Oct 28, 2011 10:36:10 GMT -7
Me too!
|
|
|
Post by highpockets on Nov 17, 2011 19:47:35 GMT -7
Some more updates(and a few more delays) Installed intake/front brackets/misc. Went to plug injectors in and yep,got LS3 injectors on the new intake(EV6 style plug) New set of adapters now on the way,d**n. Ordered the correct -10 adapter for the drysump res to VC(ARE sent a -12 by mistake) Had to clearance the bracket for the VC to fit(and had to modify the covers as well,will update later) Looks like we are nearing the final small details to fire this up and deliver,wow,been a tough one.
|
|
|
Post by highpockets on Dec 10, 2011 8:49:18 GMT -7
Looks like we are nearing the final countdown with this one.Made most of the final mods,ordered the misc parts we needed,just about ready to fire it up.New Brembos installed. Exhaust installed. Shock reservoirs mounted/lines routed. Should be firing this car up Monday morning and sending it down the road for suspension setup/tuning. See ya Monday Park !
|
|
|
Post by 500hp406 on Dec 10, 2011 16:10:39 GMT -7
Hey you working on a Sat, and PM me with a price on the black car. When I buy it are you going to tell me the correct cubes....
|
|
|
Post by unreal on Dec 10, 2011 17:04:03 GMT -7
Wayne, but it just so we know what is in it.
Just spent all day working on my car. I wish I had a lift. Boost-a-pump is all in. I still need to top off the tranny to be safe and put in the wideband.
|
|