|
Post by natedmac on Apr 18, 2011 10:50:52 GMT -7
Hey guys,
Need to figure out the size of O-Ring I need. It is for the line that exits the fuel rail at the back that goes to the Cold start injector. The line there is leaking and the old O-Ring cracked and flew away as I was out cleaning up the fuel rail.
Any info would be helpful.
|
|
|
Post by natedmac on Apr 18, 2011 11:06:12 GMT -7
Here is the ACDELCO Part # 17111954. Found that on rock. Need to see if i can find either the whole kit or just the small thick o-ring for the cold start.
|
|
|
Post by natedmac on Apr 18, 2011 12:37:06 GMT -7
Well found the exact size I am looking for.. Now time to see if I can track one down that is fuel rated. Size is 3/16 3/8 3/32 cold start injector line at fuel rail
|
|