Post by tachout on Feb 9, 2012 13:32:22 GMT -7
As Nic Stated in his thread about his engine, it is really quiet in here. Lets hear what you are working on.
Since I started this thread I will start it off.
Right now I am working a lot of hours, and still have time for a couple of projects at home.
1. Fuel Pressure Regulator went out on the Vert again so this weekend I am pulling it apart and going to rebuild the regulator. While there I am going to swap out the Distributor (I have a newer replacement), wires, plugs, and going to do some work to the Vacuum hoses, and wires under the hood and do a little general clean up.
2. As the funds become available, I am working on the Coupe again. I have a Enderle Alcohol Fuel Injection Unit, and should be ordering the blower in the next month or so. At that time, I will also order the fuel cell, and a few other small parts. As it warms up, I will finish the rear body work, mount the tank and battery, and parachute Mount. Then finish the wheel tubs, and start wraping up the interior. As long as the side work holds out, I will also get my Trans done, and get the shifter in. Then it is a matter of Brakes, Engine, and underhood!
3. Big thing happening around our house is that my 8 year old is going to be racing too. She is going to start out in a Jr. Dragster this year, so the family and I will be out at the track this year a bunch. Still a ton of work to get it ready, but as all the stuff comes in We will be putting it together (We meaning my and my Daughter) She wants to learn everything, and wants to go out and enjoy with us.
Now that is what we are up to. What are you all up to? Projects? Plans for the upcoming year? I know what our leader is up to with her Copper Car, but have not heard much from anyone other than Nic and Wayne.
Since I started this thread I will start it off.
Right now I am working a lot of hours, and still have time for a couple of projects at home.
1. Fuel Pressure Regulator went out on the Vert again so this weekend I am pulling it apart and going to rebuild the regulator. While there I am going to swap out the Distributor (I have a newer replacement), wires, plugs, and going to do some work to the Vacuum hoses, and wires under the hood and do a little general clean up.
2. As the funds become available, I am working on the Coupe again. I have a Enderle Alcohol Fuel Injection Unit, and should be ordering the blower in the next month or so. At that time, I will also order the fuel cell, and a few other small parts. As it warms up, I will finish the rear body work, mount the tank and battery, and parachute Mount. Then finish the wheel tubs, and start wraping up the interior. As long as the side work holds out, I will also get my Trans done, and get the shifter in. Then it is a matter of Brakes, Engine, and underhood!
3. Big thing happening around our house is that my 8 year old is going to be racing too. She is going to start out in a Jr. Dragster this year, so the family and I will be out at the track this year a bunch. Still a ton of work to get it ready, but as all the stuff comes in We will be putting it together (We meaning my and my Daughter) She wants to learn everything, and wants to go out and enjoy with us.
Now that is what we are up to. What are you all up to? Projects? Plans for the upcoming year? I know what our leader is up to with her Copper Car, but have not heard much from anyone other than Nic and Wayne.