Post by raamaudio on Apr 7, 2012 9:06:08 GMT -7
2-3k Miles on most mods, or less!!!!!
ALL prices are OBO, reasonable OBO that is
Body parts:
For the front I have these parts:
-ZR1 clone fenders, made from two part press molded, fiberglass, molds made from original ZR1 fenders so very accurate, strong and low in weight, manf is SS-Vettes,
-Fender well extensions to fill the gap from stock fenders to the ZR1 fenders, manf is SS-Vettes.
-GM Wheel liners as required for the fenders, new stock parts, barely used with the GS fenders I have on the car.
-GM Z06/GS/ZT1 Front bumper (factory Blem, unpainted, needs a little work but not bad)
-GM Lower Grill and support for it.
-Carbon fiber Splitter, ZR1 style, molds taken from original ZR1 part, manf SS-Vettes, VERY low weight
-ZR1 front bumper/splitter internal support, absolutely needed, made by C7 carbon but in fiberglass as is the GM part.
-Carbon fiber Side Skirts, ZR1 style, molds taken from original ZR1 parts, made by SS-Vettes
Parts needed to complete package:
These are low cost items from GM.
ZR1 fender grills
Z06'GS/ZR1 upper grill (I might have one, will look)
---------------
Rear fenders:
-Original factory Z06 fenders modified to fit a convertible, factory paint blems, dark gray metallic.
-GM fender vent grills
-GM wheel well liners
-GM splash guards
---------------
Offering the whole package for $3599, open to offers, reasonable ones that is
I can separate the rear fenders from the package and have to work out the price if I do.
I have many interested, quite a few actually, please let me know how serious you are and shipping address.
------------------------------
-ZR1 style front splitter, C7 Carbon manf, black, never installed, $299, OBO
------------------------------
Engine:
-Vararam Intake, with radiator shroud, $229
-SOLD and shipped, 321 SS long tube headers, 3" crossover midpipe and metal core cats, Exceptional build quality $799
-SOLD and shipped, Corsa Sport Exhaust, sounds incredible, $699
-Katech Red Billet tensioner, $99
-Ron Davis radiator with trans cooler, list is $950, perfect condition, $649, used less than 1k miles!
-Accusump, adaptors, lines, to mount in widow washer location, with oil cooler, lines, setup to block very little of the radiator and exit out the wheel well, not into the radiator, also has the automatic valve which is great for pre oiling before startup. $599
Drivetrain:
-RPM built 3:15 diff micro polished, upgraded output shafts, upgraded LSD (cost was $3k plus core) $1999 shipped, no core required.
-SOLD Pfadt trans mounts $229
-Hinson engine mounts $129
Suspension:
-SOLD and shipped, Pfadt street adjustable coilovers, delrin tops, $1199
-SOLD and shipped, Pfadt 3 piece street sway bars with zerts installed in mounts, $749
-SOLD and shipped, Pfadt camber kit, not complete, came on my race Vette, parts for a very good setup, shims available from them, $149
-SOLD and shipped, Control arms with Pfadt urethane bushings w/zerts installed, easy to lube, super slick, huge improvement over stock or bushings without zerts! $799 and your stock arms.
Still available:
-DRM steering rack bushing, to much work so leaving on car
Brakes:
-SOLD and shipped, XYZ 6/4 piston calipers, SS lines, two piece rotors, I have owned many big name brake kits and these are the best fitting and working out of the box brakes I have ever installed. Never tracked, super condition, $2299.
-SOLD and shipped, Brake duct kit, $150, good brand, have to look up the manf.
Wheels/Tires:
CCW SP16, 19x13 rear, 19x10.5 front, NTO5 tires, 335/285, less than 2k miles on them, never raced, no puntures, quiet, fast, wheels need a bit of polishing up, $2699 and your stock wheels and tires for regular body.
SOLD and shipped! ABS tunnel plate
And more, I will update this as I get to the parts, get them off the car, etc.....
I will need quite a few stock parts in trade, body panels, interior trim, wheels, tires, etc......
I love this car and have it so dialed in the handling, ride, just incredible but I hardly get to use it and I want to develop audio packages right away for the C7 as I learn anything I can about it so focusing my attention there.
In the mean time I might actually be able to race my race car, I have not been on a track in far to long!
Local buyers are most welcome but I can ship anything, I ship every weekday almost all year long.
Thanks
Rick
801-829-4997
Morgan Utah
ALL prices are OBO, reasonable OBO that is
Body parts:
For the front I have these parts:
-ZR1 clone fenders, made from two part press molded, fiberglass, molds made from original ZR1 fenders so very accurate, strong and low in weight, manf is SS-Vettes,
-Fender well extensions to fill the gap from stock fenders to the ZR1 fenders, manf is SS-Vettes.
-GM Wheel liners as required for the fenders, new stock parts, barely used with the GS fenders I have on the car.
-GM Z06/GS/ZT1 Front bumper (factory Blem, unpainted, needs a little work but not bad)
-GM Lower Grill and support for it.
-Carbon fiber Splitter, ZR1 style, molds taken from original ZR1 part, manf SS-Vettes, VERY low weight
-ZR1 front bumper/splitter internal support, absolutely needed, made by C7 carbon but in fiberglass as is the GM part.
-Carbon fiber Side Skirts, ZR1 style, molds taken from original ZR1 parts, made by SS-Vettes
Parts needed to complete package:
These are low cost items from GM.
ZR1 fender grills
Z06'GS/ZR1 upper grill (I might have one, will look)
---------------
Rear fenders:
-Original factory Z06 fenders modified to fit a convertible, factory paint blems, dark gray metallic.
-GM fender vent grills
-GM wheel well liners
-GM splash guards
---------------
Offering the whole package for $3599, open to offers, reasonable ones that is
I can separate the rear fenders from the package and have to work out the price if I do.
I have many interested, quite a few actually, please let me know how serious you are and shipping address.
------------------------------
-ZR1 style front splitter, C7 Carbon manf, black, never installed, $299, OBO
------------------------------
Engine:
-Vararam Intake, with radiator shroud, $229
-SOLD and shipped, 321 SS long tube headers, 3" crossover midpipe and metal core cats, Exceptional build quality $799
-SOLD and shipped, Corsa Sport Exhaust, sounds incredible, $699
-Katech Red Billet tensioner, $99
-Ron Davis radiator with trans cooler, list is $950, perfect condition, $649, used less than 1k miles!
-Accusump, adaptors, lines, to mount in widow washer location, with oil cooler, lines, setup to block very little of the radiator and exit out the wheel well, not into the radiator, also has the automatic valve which is great for pre oiling before startup. $599
Drivetrain:
-RPM built 3:15 diff micro polished, upgraded output shafts, upgraded LSD (cost was $3k plus core) $1999 shipped, no core required.
-SOLD Pfadt trans mounts $229
-Hinson engine mounts $129
Suspension:
-SOLD and shipped, Pfadt street adjustable coilovers, delrin tops, $1199
-SOLD and shipped, Pfadt 3 piece street sway bars with zerts installed in mounts, $749
-SOLD and shipped, Pfadt camber kit, not complete, came on my race Vette, parts for a very good setup, shims available from them, $149
-SOLD and shipped, Control arms with Pfadt urethane bushings w/zerts installed, easy to lube, super slick, huge improvement over stock or bushings without zerts! $799 and your stock arms.
Still available:
-DRM steering rack bushing, to much work so leaving on car
Brakes:
-SOLD and shipped, XYZ 6/4 piston calipers, SS lines, two piece rotors, I have owned many big name brake kits and these are the best fitting and working out of the box brakes I have ever installed. Never tracked, super condition, $2299.
-SOLD and shipped, Brake duct kit, $150, good brand, have to look up the manf.
Wheels/Tires:
CCW SP16, 19x13 rear, 19x10.5 front, NTO5 tires, 335/285, less than 2k miles on them, never raced, no puntures, quiet, fast, wheels need a bit of polishing up, $2699 and your stock wheels and tires for regular body.
SOLD and shipped! ABS tunnel plate
And more, I will update this as I get to the parts, get them off the car, etc.....
I will need quite a few stock parts in trade, body panels, interior trim, wheels, tires, etc......
I love this car and have it so dialed in the handling, ride, just incredible but I hardly get to use it and I want to develop audio packages right away for the C7 as I learn anything I can about it so focusing my attention there.
In the mean time I might actually be able to race my race car, I have not been on a track in far to long!
Local buyers are most welcome but I can ship anything, I ship every weekday almost all year long.
Thanks
Rick
801-829-4997
Morgan Utah