|
Post by natedmac on Nov 27, 2012 9:38:54 GMT -7
Hey, how hard is it to replace the window motor on the drivers side. I think mine is completely shot now.
|
|
|
Post by tachout on Nov 27, 2012 9:57:24 GMT -7
They are not bad. Just be careful taking the door panel off so as not to break, bend or mess anything up with it so it still fits tight. Both my coupe and my Convertible, the door panels were taken off prior to me owning them. After replacing a couple clips, and unbending one small part the door panels fit tight again, and I fixed one of many rattles in the car. You should be able to get in there, replace the motor and have it back together in an hour or so.
|
|
|
Post by 500hp406 on Nov 27, 2012 20:30:52 GMT -7
I have a FSM if you need one...do you have skinny hands....
|
|
|
Post by natedmac on Nov 27, 2012 23:02:22 GMT -7
Wayne, I may need one to make sure I get it right. I dont have skinny hands but I am good at squeezing them into tight spots.
|
|